What's Good About PSpice IBIS Model Support? It’s in the 16.6 Release!

October 7, 2013 Jerry “GenPart” Grzenia

PSpice 16.6 now provides IBIS model simulation capability. This often requested feature supports:

 

  • SPICE circuit generation for all IBIS versions
  • Support for V-T curves
  • Analog simulation of XNets (use Advanced Analysis tools for smoke analysis on bypass components)

 

 

Converting IBIS to PSpice

The Model Editor now supports all versions of IBIS for V-T curves.

 

 

Invoke Modeled.exe.

Invoke the IBIS converter from the menu Model > IBIS Translator.

Browse to Database\IBISImport\epcs64.ibs:

Click OK to generate PSpice Model.

 

Simulate Nets with SI Models

PSpice allows you to simulate nets with SI Model assignments in PSpice. Consider the following example circuit:

Select a design from Project Manager and invoke the library setup. Ensure the library setup is correct:

 

Select pins U1A.16 and U1B.11 and select RMB > Signal Integrity >Assign SI Model:

Assign any output model to the pin:

Open a TCL Command Window in Capture from the menu View > Command Window.

Type in the following TCL command to activate the IBIS netlisting -SetOptionString IBIS_PINS_NETLIST TRUE

Next, source a TCL file from your hierarchy -
source {$CDSROOT\pspice\tclscripts\IbisToPSpice\tcl\ibisnetlist.tcl}

Create a transient simulation profile Tran.

 

Generate the PSpice Netlist from IBIS by executing the following command -
::ibisnetlist::run

Run the PSpice Simulation.

Plot V(Mynet).

Create new measurement:

Launch AA for Sensitivity analysis from Capture.

Import measurement.

In the AA TCL Window, enter the following command -
source { \database\SimulatingSI\PspAAProcessDesign.tcl}

 

Run Sensitivity Analysis.

I look forward to your comments about how you’re using these new capabilities!

Jerry “GenPart” Grzenia

Previous Article
Root Cause Analysis for General Reliability Issues in Electronics Assembly: Part 1

This week, I attended a webinar hosted by IPC titled, Root Cause Analysis for General Reliability Issues in...

Next Article
OrCAD 16.6: PSpice Modeling Apps
OrCAD 16.6: PSpice Modeling Apps

Make Inductors, Zeners and Sources easily with the new PSpice Modeling Apps. If you have PSpice v16.6 with ...

Start My Free Trial Today

Start Now