Harmonic Potential: How to Think About Your Oscillator Circuits

February 16, 2021 Cadence PCB Solutions

Key Takeaways

  • All oscillators will have a harmonic potential that drives oscillations.

  • Harmonic potentials are defined in terms of a second-order differential equation, which can be solved easily for linear time-invariant (LTI) systems.

  • Harmonic potentials can also be redefined as coupled systems, and the solution in coupled circuit blocks can be determined using pole-zero analysis.

Harmonic potential oscillator

Oscillations are driven by a harmonic potential

Oscillators are simple systems when we only consider a single object in isolation—the motion spans between two extremes with a definite period, and there doesn’t seem to be much more to understanding oscillatory systems. However, in reality, oscillations can occur in complex systems with and without coupling, and the conditions leading to an oscillation may not be obvious. Whenever a system is governed by a harmonic potential, there is some chance for a damped oscillation to occur.

To spot an oscillation. you need to know what to look for in the system’s equation of motion. For a system with coupling, you need to define and solve an eigenvalue equation for the coupled system. At worst, you’ll have to run a simulation for isolated circuit blocks. Simple circuits and systems will have an obvious harmonic potential in the equation of motion, but this may not be obvious in larger circuits with many components. Fortunately, there are simulation features you can use to spot a harmonic potential or to search for oscillations directly.

What is a Harmonic Potential?

The term “harmonic potential” is normally discussed in terms of Newtonian mechanics. When discussing Hooke’s law from mechanics, the following homogeneous equation is used to define the net force acting on a particle of mass “m” and subjected to a restoring force with strength “k”:

harmonic potential force

Eq (1): Force on a particle due to a harmonic potential

The potential energy that produces this type of force, where the second derivative of a function is proportional to the function, is called a harmonic potential. In general, this type of equation will produce some oscillation. If we have some source of dissipation in the system (e.g., losses due to friction), we have a damped oscillator, which might exhibit an underdamped transient oscillation and resonance.

In any case, the general form of an oscillator equation due to a harmonic potential is defined as:

harmonic potential

Eq (2): General equation of motion for an oscillator

Here, the proportionality constant “a” can be a complex number, meaning we could have oscillation and dissipation simultaneously. This equation could also be written in the same form as a standard damped oscillator equation of motion using some algebra. Also, “f” is some measurable quantity that might exhibit an oscillation. This equation is the key to identifying the presence of a harmonic potential in electronics. If you can derive an equation for your system that looks like Eq. (2), then you know there is a harmonic potential and there may be an oscillation.

Harmonic Potential in Electronics

Although we don’t need mechanical potential energy functions in electronics, you can still derive an oscillator equation from the potential energy stored in various circuit elements. Consider a simple series LC circuit. The voltage measured across the capacitor is dependent on the charge in the capacitor and is proportional to the back EMF produced by the inductor. In this case, the total charge on the capacitor at any given moment in time is (found from Faraday’s law):

harmonic potential capacitor equation of motion

Eq (3): Example equation of motion for the charge on a capacitor in an LC circuit.

Clearly, we have some harmonic potential that governs the behavior of the circuit. The potential energy stored in the capacitor as a function of time is the integral of the voltage across the capacitor:

harmonic potential capacitor

Eq (4): Harmonic potential for a capacitor.

Because the charge and voltage in the capacitor are continuously varying functions of time, the stored potential energy will also vary over time. The various oscillations that can occur in real circuits can be very complex, especially when we consider the presence of coupling of complex circuits.

Coupled Systems

Coupled systems are more complicated and are normally written as a linear system of equations. These systems can be easy to solve by hand as an eigenvalue problem; guides on this topic can be found in many mathematics textbooks. For coupled systems and very complex RLC circuits, the better approach is to use a SPICE simulator to solve these systems and spot an oscillation. You won’t be calculating a harmonic potential directly, rather you can look for an oscillation in your simulation results.

Using SPICE Simulations to Understand Harmonic Potential

Simulation tools are very useful in systems that are very complex and the characteristic equation of motion in the system may be intractable to derive and/or solve. There are two SPICE simulations that one can perform to spot oscillations in a circuit:

  • Look at impulse responses in a transient analysis with parameter sweeps (time domain).

  • Use pole-zero analysis to spot which driving frequencies will produce stable or unstable oscillations (frequency domain).

Trial and Error With Transient Analysis and Parameter Sweeps

Parameter sweeps are a simple way to search for an oscillation in a system where, intuitively, one might expect it to occur. Parameter sweeps can be used to sweep through component values or other parameter values in a system to determine where an oscillation may occur. As an example from transient analysis, an RLC circuit has a harmonic potential that switches to underdamped behavior when the equivalent damping in the circuit becomes low enough.

The image below shows transient analysis results for an arbitrary RLC circuit driven with a pulse source to show when these oscillations become obvious. We can see from the red curve that the oscillation conditions switch from overdamped to underdamped. Eventually, the oscillations become much larger, as shown in the green curve. This type of simulation result is important because it tells us there is a harmonic potential in the circuit, which may confirm our intuition, and the sweep results help us see the limits beyond which the oscillation will occur.

harmonic potential transient analysis

Transient analysis results with a parameter sweep in PSpice

Pole-Zero Analysis

Pole-zero analysis is a better option for complex circuits that may need to operate at a range of frequencies (i.e., in AC systems). This analysis can treat coupled or uncoupled LTI systems; it cannot treat nonlinear circuits or components without a linear approximation. This type of analysis will give you the transient oscillation frequency and damping constant for each pole in the system, which combine to produce the transient response in the system. This numerical technique can also be used with a parameter sweep for design exploration.

When you’re designing a system with harmonic potential and you need to verify the conditions for oscillation, you’ll need the front-end design features from Cadence to create and evaluate your designs. The PSpice Simulator application from Cadence includes a complete set of PCB design and layout features that integrate with simulation and modeling tools for building and optimizing your next electrochemical system.

If you’re looking to learn more about how Cadence has the solution for you, talk to us and our team of experts.


About the Author

Cadence PCB solutions is a complete front to back design tool to enable fast and efficient product creation. Cadence enables users accurately shorten design cycles to hand off to manufacturing through modern, IPC-2581 industry standard.

Follow on Linkedin Visit Website More Content by Cadence PCB Solutions
Previous Article
How to Use a Transmission Line Reflection Coefficient Correctly
How to Use a Transmission Line Reflection Coefficient Correctly

There is more than one way to examine how the transmission line reflection coefficient affects your signals.

Next Article
 How to Reduce Stray Capacitance in Electronic Circuits
How to Reduce Stray Capacitance in Electronic Circuits

Learn how to reduce stray capacitance in electronic circuits, how it occurs, and strategies to avoid it to ...

Start My Free Trial Today

Start Now