VLSI Technology: Its History and Uses in Modern Technology

November 10, 2020 Cadence PCB Solutions

Key Takeaways

●     Learn about VLSI technology.

●     Gain a greater understanding of the advantages of VLSI technology.

●     Learn how VLSI technology is used in today’s devices and systems.

 The letters VLSI written over a background of binary code

VLSI affords IC designers the ability to design utilizing less space. 

Typically, electronic circuits incorporate a CPU, RAM, ROM, and other peripherals on a single PCBA. However, very large-scale integration (VLSI) technology affords an IC designer the ability to add all of these into one chip. If we examine the electronics landscape over the last few decades, we will see evidence of its rapid growth. The benefits include increased functionality, improved miniaturization, and increased overall performance. However, this demand to place more components while increasingly utilizing less space translates into a lower margin for error.

Keeping that in mind, it is understandable why, over the last few years, Silicon (CMOS) technology is now the leading fabrication process for cost-effective and relatively high-performance VLSI circuits.  

VLSI Technology

Very large-scale integration is a process of embedding or integrating hundreds of thousands of transistors onto a singular silicon semiconductor microchip. VLSI technology's conception dates back to the late 1970s when advanced level processor (computer) microchips were also in their development stages. Two of the most common VLSI devices are the microprocessor and the microcontroller.

VLSI refers to an integrated circuit technology with numerous devices on a single chip. The term originates, of course, in the 1970s, along with various other scale integration classifications based on the number of gates or transistors per IC.

The remarkable growth of the electronics industry is primarily due to the advances in large-scale integration technologies. With the arrival of VLSI designs, the number of possibilities for ICs in control applications, telecommunications, high-performance computing, and consumer electronics as a whole continues to rise.

Presently, technologies like smartphones and cellular communications afford unprecedented portability, processing capabilities, and application access due to VLSI technology. The forecast for this trend indicates a rapid increase as demands continue to increase.

The Advantages of VLSI Technology

The following are the primary advantages of VLSI technology:

  • Reduced size for circuits

  • Increased cost-effectiveness for devices

  • Improved performance in terms of the operating speed of circuits

  • Requires less power than discrete components

  • Higher device reliability

  • Requires less space and promotes miniaturization

The Design Process of a VLSI IC

Overall, VLSI IC design incorporates two primary stages or parts:

1.   Front-End Design: This includes digital design using a hardware description language, for example, Verilog, System Verilog, and VHDL. Furthermore, this stage encompasses design verification via simulation and other verification techniques. The entire process also incorporates designing, which starts with the gates and continues through to design for testability.

2.   Back-End Design: This consists of characterization and CMOS library design. Additionally, it involves fault simulation and physical design.

The entire design process follows a step-by-step approach, and the following are the front-end design steps:

  • Problem Specification: This is a high-level interpretation of a system. We address the key parameters, such as design techniques, functionality, performance, fabrication technology, and physical dimensions. The final specifications include the power, functionality, speed, and size of the VLSI system.

  • Architecture Definition: This includes fundamental specifications such as floating-point units and which system to use, such as RISC or CISC and ALU's cache size.

  • Functional Design: This recognizes the vital functional units of a system and, thus, enables identification of each unit's physical and electrical specifications and interconnect requirements.

  • Logic Design: This step involves control flow, Boolean expressions, word width, and register allocation.

  • Circuit Design: This step performs the realization of the circuit in the form of a netlist. Since this is a software step, it utilizes simulation to check the outcome.

  • Physical Design: In this step, we create the layout by converting the netlist into a geometrical depiction. This step also follows some preconceived static rules, such as the lambda rules, which afford precise details of the ratio, spacing between components, and size.

The following are the back-end design steps for hardware development:

  • Wafer Processing: This step utilizes pure silicon melted in a pot at 1400º C. Then, a small seed comprising the required crystal orientation is injected into liquefied silicon and gradually pulled out, 1mm per minute. We manufacture the silicon crystal as a cylindrical ingot and cut it into discs or wafers before polishing and crystal orientation.

  • Lithography: This process (photolithography) includes masking with photo etching and a photographic mask. Next, we apply a photoresist film on the wafer. A photo aligner then aligns the wafer to a mask. Finally, we expose the wafer to ultraviolet light, thus highlighting the tracks through the mask.

  • Etching: Here, we selectively remove material from the surface of the wafer to produce patterns. With an etching mask to protect the essential parts of the material, we use additional plasma or chemicals to remove the remaining photoresist.

  • Ion Implantation: Here, we utilize a method to achieve a desired electrical characteristic in the semiconductor, i.e., a process of adding dopants. The process uses a beam of high-energy dopant ions to target precise areas of the wafer. The beam's energy level determines the depth of wafer penetration.

  • Metallization: In this step, we apply a thin layer of aluminum over the entire wafer.

  • Assembly and Packaging: Every one of the wafers contains hundreds of chips. Therefore, we use a diamond saw to cut the wafers into single chips. Afterward, they receive electrical testing, and we discard the failures. In contrast, those that pass receive a thorough visual inspection utilizing a microscope. Finally, we package the chips that pass the visual inspection as well as recheck them.

VLSI technology is ideally suited to the demands of today's electronic devices and systems. With the ever-increasing demand for miniaturization, portability, performance, reliability, and functionality, VLSI technology will continue to drive electronics advancement.

PCB with semiconductor using VLSI technology

This PCB with semiconductors would not be possible without VLSI technology.

Designing for the low margin of error that exists in VLSI technology requires using a state-of-the-art PCB Design and Analysis software to help you get the job done right. Allegro, by Cadence, is one such software that has all the features and analysis tools you need for everything from basic to elaborate circuit designs. 

If you're looking to learn more about how Cadence has the solution for you, talk to us and our team of experts.

 

About the Author

Cadence PCB solutions is a complete front to back design tool to enable fast and efficient product creation. Cadence enables users accurately shorten design cycles to hand off to manufacturing through modern, IPC-2581 industry standard.

Follow on Linkedin Visit Website More Content by Cadence PCB Solutions
Previous Flipbook
10 Common Design for Manufacturing (DFM) Issues and How to Solve Them
10 Common Design for Manufacturing (DFM) Issues and How to Solve Them

Every day is a busy for PCB Designers; strict schedules and tight deadlines. From layout to manufacture and...

Next Flipbook
FLEXing Like a PCB Expert
FLEXing Like a PCB Expert

Flex PCB design has many advantages. Along with those benefits come new design challenges that weren’t pres...

Start My Free Trial Today

Start Now