OrCAD Capture Tutorials

  • OrCAD Capture Tutorial: Getting Started

    OrCAD Capture Tutorial: Getting Started

    Quick video showing you how to use this OrCAD tutorial.

    Read Article
  • OrCAD Capture Tutorial: 01.New Project

    OrCAD Capture Tutorial: 01.New Project

    Create a new schematic project in OrCAD Capture, set preferences for the schematic design canvas, add a title block and create a new library for the design.

    Read Article
  • OrCAD Capture Tutorial: 02.Adding Libraries and Parts

    OrCAD Capture Tutorial: 02.Adding Libraries and Parts

    Set up your library by adding parts from an existing Capture default library or create a new part from scratch.; You can also subscribe to Ultra Librarian to download from millions of pre-built...

    Read Article
  • OrCAD Capture Tutorial: 03.Searching and Placing Parts

    OrCAD Capture Tutorial: 03.Searching and Placing Parts

    Search and place parts to the design from Cadence default libraries and the library you have created.

    Read Article
  • OrCAD Capture Tutorial: 04.Connect Parts

    OrCAD Capture Tutorial: 04.Connect Parts

    Place wires to connect components in your design, place and connect buses and learn the basics of autowire.

    Read Article
  • OrCAD Capture Tutorial: 05.Net Aliases

    OrCAD Capture Tutorial: 05.Net Aliases

    Set aliases to nets and buses, which will be very useful for the layout process.

    Read Article
  • OrCAD Capture Tutorial: 06.Define Differential Pairs

    OrCAD Capture Tutorial: 06.Define Differential Pairs

    Differential pairs can be defined in both the schematic capture phase in OrCAD Capture and the PCB layout phase in OrCAD PCB Editor.

    Read Article
  • OrCAD Capture Tutorial: 07.Assign Part Information to the Design

    OrCAD Capture Tutorial: 07.Assign Part Information to the Design

    Discover multiple ways to assign value and change properties of components.

    Read Article
  • OrCAD Capture Tutorial: 08.Annotating Your Design

    OrCAD Capture Tutorial: 08.Annotating Your Design

    Performing an annotation chronologically renumbers the part references in your schematic design from top to bottom to ensure each component is uniquely defined. You can choose to annotate your...

    Read Article
  • OrCAD Capture Tutorial: 09.Perform a Schematic DRC

    OrCAD Capture Tutorial: 09.Perform a Schematic DRC

    It is always a good idea to run a Design Rule Check (DRC) before generating a netlist. The schematic DRC will check your design for design rule violations and place error markers on your schematic...

    Read Article
  • OrCAD Capture Tutorial: 10.Generate BOM (Bill of Materials)

    OrCAD Capture Tutorial: 10.Generate BOM (Bill of Materials)

    Add manufacturers and parts information to properties of parts, fill in the parts information from manufactures, and generate and view bill of materials (BOM).

    Read Article
  • OrCAD Capture Tutorial: 11.Generate a Smart PDF

    OrCAD Capture Tutorial: 11.Generate a Smart PDF

    Create smart PDF so that you can view and share your schematic in a PDF reader with descendible hierarchies and component links without worrying about losing your design IP.

    Read Article
  • loading
    Loading More...