Set aliases to nets and buses, which will be very useful for the layout process.
Download Sample Capture Files
Download NowOther content in this Stream

OrCAD Capture Tutorial: Getting Started
Quick video showing you how to use this OrCAD tutorial.

OrCAD Capture Tutorial: 01.New Project
Create a new schematic project in OrCAD Capture, set preferences for the schematic design canvas, add a title block and create a new library for the design.

OrCAD Capture Tutorial: 02.Adding Libraries and Parts
Set up your library by adding parts from an existing Capture default library or create a new part from scratch.; You can also subscribe to Ultra Librarian to download from millions of pre-built...

OrCAD Capture Tutorial: 03.Searching and Placing Parts
Search and place parts to the design from Cadence default libraries and the library you have created.

OrCAD Capture Tutorial: 04.Connect Parts
Place wires to connect components in your design, place and connect buses and learn the basics of autowire.

OrCAD Capture Tutorial: 06.Define Differential Pairs
Differential pairs can be defined in both the schematic capture phase in OrCAD Capture and the PCB layout phase in OrCAD PCB Editor.

OrCAD Capture Tutorial: 07.Assign Part Information to the Design
Discover multiple ways to assign value and change properties of components.

OrCAD Capture Tutorial: 08.Annotating Your Design
Performing an annotation chronologically renumbers the part references in your schematic design from top to bottom to ensure each component is uniquely defined. You can choose to annotate your...

OrCAD Capture Tutorial: 09.Perform a Schematic DRC
It is always a good idea to run a Design Rule Check (DRC) before generating a netlist. The schematic DRC will check your design for design rule violations and place error markers on your schematic...

OrCAD Capture Tutorial: 10.Generate BOM (Bill of Materials)
Add manufacturers and parts information to properties of parts, fill in the parts information from manufactures, and generate and view bill of materials (BOM).

OrCAD Capture Tutorial: 11.Generate a Smart PDF