Quick video showing you how to use this OrCAD tutorial.
Download Sample Capture FilesDownload Now
Other content in this Stream
Create a new schematic project in OrCAD Capture, set preferences for the schematic design canvas, add a title block and create a new library for the design.
Set up your library by adding parts from an existing Capture default library or create a new part from scratch.; You can also subscribe to Ultra Librarian to download from millions of pre-built...
Search and place parts to the design from Cadence default libraries and the library you have created.
Place wires to connect components in your design, place and connect buses and learn the basics of autowire.
Set aliases to nets and buses, which will be very useful for the layout process.
Differential pairs can be defined in both the schematic capture phase in OrCAD Capture and the PCB layout phase in OrCAD PCB Editor.
Discover multiple ways to assign value and change properties of components.
Performing an annotation chronologically renumbers the part references in your schematic design from top to bottom to ensure each component is uniquely defined. You can choose to annotate your...
It is always a good idea to run a Design Rule Check (DRC) before generating a netlist. The schematic DRC will check your design for design rule violations and place error markers on your schematic...
Add manufacturers and parts information to properties of parts, fill in the parts information from manufactures, and generate and view bill of materials (BOM).
Create smart PDF so that you can view and share your schematic in a PDF reader with descendible hierarchies and component links without worrying about losing your design IP.