× Share this Article

Facebook
Twitter
Email
LinkedIn

Symbol Editor

July 17, 2018 Team OrCAD

Share this Article
Facebook
Twitter
Email
LinkedIn

Quickly and easily create circuit schematic symbols and associate them with PSpice simulation models.

Improve Circuit Performance and Reliability, and Optimize Cost

OrCAD PSpice finds real, commercially available parts for your component variables and analyzes your entire...

Front End Constraints

Capture electrical constraints early in the design process and automatically communicate them to PCB layout...

Start My Free Trial Today

Other content in this Stream

Real-Time 3D Measurements

Real-Time 3D Movement

DesignTrue DFM Ecosystem

Real-Time DFT Rules

Real-Time DFF Rules

DFM Rules Wizard

Real-Time Design for Manufacturability

Configure Backdrilling in Padstack Editor

Z-Axis and Package Pin Delay

Real-Time Coupling Analysis

Real-Time Dynamic Differential Pair Routing

Real-Time Placement Analysis

Real-Time Route Analysis

Real-Time Impedance Analysis

Real-Time Interactive 3D

Co-Simulate Mechanical and Electrical Systems

Validate Your Circuit Automatically Without Manually Plotting Graphs

Improve Circuit Performance and Reliability, and Optimize Cost

Front End Constraints

Find Resources You Need to Get Your Job Done

Symbol Editor

Symbol Editor

Previous Article

Next Article

Other content in this Stream

Get accurate measurements of a component and copper spacing in the natural and intuitive Interactive3D canvas

Move and place components in 3D, where it’s easiest to find and fix collisions.

Connect with the world's leading manufacturers to easily request and implement custom manufacturability rules

Double check your DFM rules before signoff with a forced batch check of all rules for your whole design. If you do find something awry, it’s easy to locate and fix in your design.

Easily ensure test points are accessible in your designs.

Check for common copper and component spacing issues that could potentially derail manufacturing and cause a respin.

Easily create and assign constraints for manufacturing based on IPC standards and common PCB rules.

Post-design DFM checks are too late. Even if you’re able to find a mistake, you’re going to lose hours, days, even weeks adjusting your design.

Remove unused sections of plated through holes in high-speed designs to improve signal integrity on your designs.

Measure from true signal origin to end point through vias and through packages, not just the etch, so you can get timing right and ensure signal performance.

Easily and quickly identify coupling issues without always having to rely on the SI expert.

Easily meet length and phase pin-to-pin constraints as traces bend without creating electrical issues.

Visual indicators of length constraints help you meet delay propagation and total etch length goals when placing components.

Real-time interactive checks help you easily find and fix common route quality issues that manufacturing DRC signoff checks miss.

Easily and quickly identify impedance discontinuity issues visually, without simulation models or extensive signal integrity expertise.

Your products all have three dimensions. And viewing them in 3D is great, but going back and forth from a 2D design and a 3D visualization feels a lot like trial and error. i

The seamless bi-directional integration between MathWorks MATLAB Simulink and PSpice lets you easily simulate electrical circuits and mechanical, hydraulic, thermal blocks in one unified environment.

Virtually create and test designs before developing hardware, saving you time, money and materials.

OrCAD PSpice finds real, commercially available parts for your component variables and analyzes your entire circuit to model expected current, voltage, power and temperature condition for every...

Capture electrical constraints early in the design process and automatically communicate them to PCB layout designers directly from the circuit schematic environment.