Interconnect Design Solutions selects OrCAD library Builder for Ongoing Library Creation and Management

April 12, 2018 OrCAD PCB Solutions

The IDS team often found itself needing to create and/ or manage part libraries for their customers. Creating and managing these client libraries was a very manual process that could take up a significant amount of time during a project.

The average time to create a part without using OrCAD Library builder can exceed an hour per part. IDS engineers would need to manually build symbols and footprints from component datasheet specs and then manually verify the footprint and symbols match. With so many manual steps not only was a lot of time being used but the opportunity for error was greatly increased. Furthermore the effort spent on these tasks was not usually accounted for in the overall project timeline.

About the Author

PCB Design Solutions to go from prototype to production in less time and get it right the first time with real-time feedback.
Follow on Linkedin Visit Website More Content by OrCAD PCB Solutions

Previous Flipbook

Rapid Symbols and Footprints with EDABuilder

Next Flipbook

Compology Selects OrCAD for Revolutionary Garbage Sensor System

Compology chose three tools from the OrCAD tool suite to develop their PCB designs.

Interconnect Design Solutions selects OrCAD library Builder for Ongoing Library Creation and Management

About the Author

Previous Flipbook

Next Flipbook

Most Recent Flipbooks

OrCAD Enables Meteca to Bring Innovative PCBA Bridge Product to Market Quickly

With OrCAD Sigrity ERC the design was screened for impedance continuity and parallelism of traces to minimize reflections and crosstalk.

Design a fully electric bike that road worth and safe in 9 months.

Seamlessly place components and cross-probe between their schematic and PCB designs.

When we are thinking about what is best for the customer in the long-run, the answer is that we need to push the organization forward and align us with the customer’s needs. Using OrCAD Capture CIS...

Compology chose three tools from the OrCAD tool suite to develop their PCB designs.

With Cadence OrCAD and Allegro PCB design technology, it allows designers and engineers to significantly improve their cycle times and increase overall design quality, all with a solution that fits

Today, more and more electronics—from passenger safety systems to other safety and convenience features—are being added to cars.

Solid State Logic needed to be able to accurately simulate and optimize its circuits well before committing them to manufacturing.

With the ultimate goals set by the United Nations Sustainable Development Goals initiative, Simprints addresses various challenges

Fitting a lot of electronic technology into a small form factor and requiring a circuit board layout with no interference problems

Quickly route complex, high-density boards for a variety of applications, including industrial- and military-grade designs

The easy-to-use constraint manager in the OrCAD tool helps us manage hierarchical design rules by regions and enables online DRCs as immediate feedback.

Boards meet manufacturability requirements the first time with zero defects using OrCAD PCB Designer. Ability to meet aggressive schedules and low cost requirements for high-performance boards.

Captured ideas in the OrCAD schematic editor in a fraction of the time it would take in competitive tools.Imported OrCAD schematic in OrCAD PCB Designer to quickly complete a physical layout